Welcome to www.DoitFixit.com

www.doitfixit.com

Exchange 2010 Setup Error – The following error was generated when “$error.Clear();

By Leave a Comment

Error 1

Some controls aren’t valid. – Setup previously failed while performing the action “DisasterRecovery”. You can’t resume setup by performing the action “install”. – Setup previously failed while performing the action “Uninstall”. You can’t resume setup by performing the action “install”. – Setup previously failed while performing the action “Uninstall”. You can’t resume setup by performing the action “install”.

Before proceed make a full backup of the registry editor. Open Registry and go to below path.

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\

Go to each ClientAccessRole, HubTransportRole & MailboxRole; Remove Action and Watermark values from all entries.

Now re-install the server role.

Error 2

Mailbox Role
Failed

Error:
The following error was generated when “$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
{
$WsbBinPath=$RoleInstallPath+”bin\wsbexchange.exe”;
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;

if ((get-service wsbexchange* | where {$_.name -eq “wsbexchange”}))
{
if ((get-service wsbexchange).Status -eq “Running”)
{
Start-SetupProcess -Name:”$servicecmd” -Args:”stop wsbexchange”;
}
Start-SetupProcess -Name:”$servicecmd” -Args:”delete wsbexchange”;
}

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`” /t REG_SZ /d `”$WsbBinPath`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LocalService /t REG_SZ /d `”wsbexchange`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LaunchPermission /t REG_BINARY /d `”010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\wsbexchange.exe`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v `”Application Identifier`” /t REG_SZ /d Exchange /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v CLSID /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$servicecmd” -Args:”create wsbexchange binpath= `”$WsbBinPath`” type= own start= demand error= ignore obj= LocalSystem DisplayName= `”Microsoft Exchange Server Extension for Windows Server Backup`””;
Start-SetupProcess -Name:”$servicecmd” -Args:”description wsbexchange `”Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`””;
}
” was run: “Process execution failed with exit code 1.”.

Process execution failed with exit code 1.
Click here for help… http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp

Error:
The following error was generated when “$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
{
$WsbBinPath=$RoleInstallPath+”bin\wsbexchange.exe”;
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;

if ((get-service wsbexchange* | where {$_.name -eq “wsbexchange”}))
{
if ((get-service wsbexchange).Status -eq “Running”)
{
Start-SetupProcess -Name:”$servicecmd” -Args:”stop wsbexchange”;
}
Start-SetupProcess -Name:”$servicecmd” -Args:”delete wsbexchange”;
}

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`” /t REG_SZ /d `”$WsbBinPath`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LocalService /t REG_SZ /d `”wsbexchange`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LaunchPermission /t REG_BINARY /d `”010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\wsbexchange.exe`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v `”Application Identifier`” /t REG_SZ /d Exchange /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v CLSID /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$servicecmd” -Args:”create wsbexchange binpath= `”$WsbBinPath`” type= own start= demand error= ignore obj= LocalSystem DisplayName= `”Microsoft Exchange Server Extension for Windows Server Backup`””;
Start-SetupProcess -Name:”$servicecmd” -Args:”description wsbexchange `”Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`””;
}
” was run: “Process execution failed with exit code 1.”.

Process execution failed with exit code 1.
Click here for help… http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp

Error:
The following error was generated when “$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
{
$WsbBinPath=$RoleInstallPath+”bin\wsbexchange.exe”;
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;

if ((get-service wsbexchange* | where {$_.name -eq “wsbexchange”}))
{
if ((get-service wsbexchange).Status -eq “Running”)
{
Start-SetupProcess -Name:”$servicecmd” -Args:”stop wsbexchange”;
}
Start-SetupProcess -Name:”$servicecmd” -Args:”delete wsbexchange”;
}

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`” /t REG_SZ /d `”$WsbBinPath`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LocalService /t REG_SZ /d `”wsbexchange`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LaunchPermission /t REG_BINARY /d `”010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\wsbexchange.exe`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v `”Application Identifier`” /t REG_SZ /d Exchange /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v CLSID /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$servicecmd” -Args:”create wsbexchange binpath= `”$WsbBinPath`” type= own start= demand error= ignore obj= LocalSystem DisplayName= `”Microsoft Exchange Server Extension for Windows Server Backup`””;
Start-SetupProcess -Name:”$servicecmd” -Args:”description wsbexchange `”Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`””;
}
” was run: “Process execution failed with exit code 1.”.

Process execution failed with exit code 1.
Click here for help… http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp

Error:
The following error was generated when “$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
{
$WsbBinPath=$RoleInstallPath+”bin\wsbexchange.exe”;
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;

if ((get-service wsbexchange* | where {$_.name -eq “wsbexchange”}))
{
if ((get-service wsbexchange).Status -eq “Running”)
{
Start-SetupProcess -Name:”$servicecmd” -Args:”stop wsbexchange”;
}
Start-SetupProcess -Name:”$servicecmd” -Args:”delete wsbexchange”;
}

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`” /t REG_SZ /d `”$WsbBinPath`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LocalService /t REG_SZ /d `”wsbexchange`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LaunchPermission /t REG_BINARY /d `”010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\wsbexchange.exe`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v `”Application Identifier`” /t REG_SZ /d Exchange /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v CLSID /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$servicecmd” -Args:”create wsbexchange binpath= `”$WsbBinPath`” type= own start= demand error= ignore obj= LocalSystem DisplayName= `”Microsoft Exchange Server Extension for Windows Server Backup`””;
Start-SetupProcess -Name:”$servicecmd” -Args:”description wsbexchange `”Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`””;
}
” was run: “Process execution failed with exit code 1.”.

Process execution failed with exit code 1.
Click here for help… http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp

Error:
The following error was generated when “$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
{
$WsbBinPath=$RoleInstallPath+”bin\wsbexchange.exe”;
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;

if ((get-service wsbexchange* | where {$_.name -eq “wsbexchange”}))
{
if ((get-service wsbexchange).Status -eq “Running”)
{
Start-SetupProcess -Name:”$servicecmd” -Args:”stop wsbexchange”;
}
Start-SetupProcess -Name:”$servicecmd” -Args:”delete wsbexchange”;
}

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`” /t REG_SZ /d `”$WsbBinPath`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LocalService /t REG_SZ /d `”wsbexchange`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LaunchPermission /t REG_BINARY /d `”010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\wsbexchange.exe`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v `”Application Identifier`” /t REG_SZ /d Exchange /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v CLSID /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$servicecmd” -Args:”create wsbexchange binpath= `”$WsbBinPath`” type= own start= demand error= ignore obj= LocalSystem DisplayName= `”Microsoft Exchange Server Extension for Windows Server Backup`””;
Start-SetupProcess -Name:”$servicecmd” -Args:”description wsbexchange `”Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`””;
}
” was run: “Process execution failed with exit code 1.”.

Process execution failed with exit code 1.
Click here for help… http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp

Error:
The following error was generated when “$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
{
$WsbBinPath=$RoleInstallPath+”bin\wsbexchange.exe”;
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;

if ((get-service wsbexchange* | where {$_.name -eq “wsbexchange”}))
{
if ((get-service wsbexchange).Status -eq “Running”)
{
Start-SetupProcess -Name:”$servicecmd” -Args:”stop wsbexchange”;
}
Start-SetupProcess -Name:”$servicecmd” -Args:”delete wsbexchange”;
}

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`” /t REG_SZ /d `”$WsbBinPath`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LocalService /t REG_SZ /d `”wsbexchange`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LaunchPermission /t REG_BINARY /d `”010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\wsbexchange.exe`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v `”Application Identifier`” /t REG_SZ /d Exchange /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v CLSID /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$servicecmd” -Args:”create wsbexchange binpath= `”$WsbBinPath`” type= own start= demand error= ignore obj= LocalSystem DisplayName= `”Microsoft Exchange Server Extension for Windows Server Backup`””;
Start-SetupProcess -Name:”$servicecmd” -Args:”description wsbexchange `”Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`””;
}
” was run: “Process execution failed with exit code 1.”.

Process execution failed with exit code 1.
Click here for help… http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp

Error:
The following error was generated when “$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
{
$WsbBinPath=$RoleInstallPath+”bin\wsbexchange.exe”;
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;

if ((get-service wsbexchange* | where {$_.name -eq “wsbexchange”}))
{
if ((get-service wsbexchange).Status -eq “Running”)
{
Start-SetupProcess -Name:”$servicecmd” -Args:”stop wsbexchange”;
}
Start-SetupProcess -Name:”$servicecmd” -Args:”delete wsbexchange”;
}

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`” /t REG_SZ /d `”$WsbBinPath`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LocalService /t REG_SZ /d `”wsbexchange`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LaunchPermission /t REG_BINARY /d `”010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\wsbexchange.exe`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v `”Application Identifier`” /t REG_SZ /d Exchange /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v CLSID /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$servicecmd” -Args:”create wsbexchange binpath= `”$WsbBinPath`” type= own start= demand error= ignore obj= LocalSystem DisplayName= `”Microsoft Exchange Server Extension for Windows Server Backup`””;
Start-SetupProcess -Name:”$servicecmd” -Args:”description wsbexchange `”Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`””;
}
” was run: “Process execution failed with exit code 1.”.

Process execution failed with exit code 1.
Click here for help… http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp

Error:
The following error was generated when “$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
{
$WsbBinPath=$RoleInstallPath+”bin\wsbexchange.exe”;
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;

if ((get-service wsbexchange* | where {$_.name -eq “wsbexchange”}))
{
if ((get-service wsbexchange).Status -eq “Running”)
{
Start-SetupProcess -Name:”$servicecmd” -Args:”stop wsbexchange”;
}
Start-SetupProcess -Name:”$servicecmd” -Args:”delete wsbexchange”;
}

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`” /t REG_SZ /d `”$WsbBinPath`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LocalService /t REG_SZ /d `”wsbexchange`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LaunchPermission /t REG_BINARY /d `”010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\wsbexchange.exe`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v `”Application Identifier`” /t REG_SZ /d Exchange /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v CLSID /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$servicecmd” -Args:”create wsbexchange binpath= `”$WsbBinPath`” type= own start= demand error= ignore obj= LocalSystem DisplayName= `”Microsoft Exchange Server Extension for Windows Server Backup`””;
Start-SetupProcess -Name:”$servicecmd” -Args:”description wsbexchange `”Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`””;
}
” was run: “Process execution failed with exit code 1.”.

Process execution failed with exit code 1.
Click here for help… http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp

Error:
The following error was generated when “$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
{
$WsbBinPath=$RoleInstallPath+”bin\wsbexchange.exe”;
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;

if ((get-service wsbexchange* | where {$_.name -eq “wsbexchange”}))
{
if ((get-service wsbexchange).Status -eq “Running”)
{
Start-SetupProcess -Name:”$servicecmd” -Args:”stop wsbexchange”;
}
Start-SetupProcess -Name:”$servicecmd” -Args:”delete wsbexchange”;
}

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`” /t REG_SZ /d `”$WsbBinPath`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LocalService /t REG_SZ /d `”wsbexchange`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LaunchPermission /t REG_BINARY /d `”010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\wsbexchange.exe`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v `”Application Identifier`” /t REG_SZ /d Exchange /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v CLSID /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$servicecmd” -Args:”create wsbexchange binpath= `”$WsbBinPath`” type= own start= demand error= ignore obj= LocalSystem DisplayName= `”Microsoft Exchange Server Extension for Windows Server Backup`””;
Start-SetupProcess -Name:”$servicecmd” -Args:”description wsbexchange `”Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`””;
}
” was run: “Process execution failed with exit code 1.”.

Process execution failed with exit code 1.
Click here for help… http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp

Error:
The following error was generated when “$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
{
$WsbBinPath=$RoleInstallPath+”bin\wsbexchange.exe”;
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;

if ((get-service wsbexchange* | where {$_.name -eq “wsbexchange”}))
{
if ((get-service wsbexchange).Status -eq “Running”)
{
Start-SetupProcess -Name:”$servicecmd” -Args:”stop wsbexchange”;
}
Start-SetupProcess -Name:”$servicecmd” -Args:”delete wsbexchange”;
}

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`” /t REG_SZ /d `”$WsbBinPath`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LocalService /t REG_SZ /d `”wsbexchange`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LaunchPermission /t REG_BINARY /d `”010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\wsbexchange.exe`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v `”Application Identifier`” /t REG_SZ /d Exchange /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v CLSID /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$servicecmd” -Args:”create wsbexchange binpath= `”$WsbBinPath`” type= own start= demand error= ignore obj= LocalSystem DisplayName= `”Microsoft Exchange Server Extension for Windows Server Backup`””;
Start-SetupProcess -Name:”$servicecmd” -Args:”description wsbexchange `”Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`””;
}
” was run: “Process execution failed with exit code 1.”.

Process execution failed with exit code 1.
Click here for help… http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp

Error:
The following error was generated when “$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
{
$WsbBinPath=$RoleInstallPath+”bin\wsbexchange.exe”;
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;

if ((get-service wsbexchange* | where {$_.name -eq “wsbexchange”}))
{
if ((get-service wsbexchange).Status -eq “Running”)
{
Start-SetupProcess -Name:”$servicecmd” -Args:”stop wsbexchange”;
}
Start-SetupProcess -Name:”$servicecmd” -Args:”delete wsbexchange”;
}

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`” /t REG_SZ /d `”$WsbBinPath`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /t REG_SZ /d `”CExchangeHelper Class`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LocalService /t REG_SZ /d `”wsbexchange`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /v LaunchPermission /t REG_BINARY /d `”010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`” /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKCR\APPID\wsbexchange.exe`” /v AppId /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v `”Application Identifier`” /t REG_SZ /d Exchange /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`” /v CLSID /t REG_SZ /d `”{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`” /f”;

Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$reg” -Args:”add `”HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`” /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f”;
Start-SetupProcess -Name:”$servicecmd” -Args:”create wsbexchange binpath= `”$WsbBinPath`” type= own start= demand error= ignore obj= LocalSystem DisplayName= `”Microsoft Exchange Server Extension for Windows Server Backup`””;
Start-SetupProcess -Name:”$servicecmd” -Args:”description wsbexchange `”Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`””;
}
” was run: “Process execution failed with exit code 1.”.

Process execution failed with exit code 1.
Click here for help… http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp

Elapsed Time: 00:02:14

Finalizing Setup
Cancelled

Cause to this issue is you may not have permission to edit system registry or it is disabled by a script or Group policy. Try to manually open RegEdit and check the possibility.

To check Group Policy settings. Run Rsop.msc on the exchange server and see the below settings.

Remove any GP settings or script which prevent editing registry and re-install the server role.

Reader Interactions

Leave a Reply

Your email address will not be published. Required fields are marked *